Pool Deck Resurfacing on
the Gulf Coast

Pool Deck Resurfacing & Concrete Coatings Across the Gulf Coast

Professional Pool Deck Resurfacing That Improves Performance

Pool deck resurfacing restores a worn, cracked, slippery, or heat-soaked concrete pool deck by bonding a new, textured coating system over the existing slab — no demolition required. Concrete Coatings Inc. has been resurfacing pool decks across Louisiana, South Mississippi, and South Alabama for 37 years, and we are the only authorized Sundek installer in the region, from the Texas line to the Florida line. When the concrete underneath is structurally sound, resurfacing gives you a deck that is cooler underfoot, slip-resistant when wet, and built to stand up to Gulf Coast sun, humidity, and pool chemicals — without the cost and disruption of tearing out and re-pouring.
free estimate
concrete pool deck
Commercial pool deck Gulf Coast

What Is Pool Deck Resurfacing?

Pool deck resurfacing is the process of preparing an existing concrete pool deck and applying a new engineered surface on top of it. The original slab stays in place; what changes is everything you see and touch. A professional resurfacing job is much more than a coat of paint. It typically includes:
  • Pressure cleaning and mechanical surface preparation so the new system bonds to the concrete
  • Crack and joint repair, including a flexible sealant at expansion joints
  • A cementitious or acrylic coating system applied in one or more layers
  • A decorative texture, color, and optional pattern or border
  • A protective topcoat that guards against UV, moisture, and pool chemicals
The result is a new surface that solves the problems homeowners and property managers bring to us most often: hot concrete, slick spots near the waterline, stains, spalling, and a dated look. Pool deck resurfacing vs. pool deck coating: the two terms are often used interchangeably. “Coating” usually describes a thinner, spray- or roller-applied finish, while “resurfacing” describes the full process — including overlays that rebuild the wearing surface. We recommend the system (overlay, spray texture, or acrylic recoat) based on the condition of your deck, never a one-size-fits-all product.

Why Gulf Coast Pool Decks Wear Out Faster

Pool decks along the Gulf Coast work harder than they do in most of the country. Between the Texas and Florida lines, a concrete pool deck faces:

  • 01. Intense sun and UV exposure for most of the year, which fades finishes and heats bare concrete to uncomfortable temperatures.
  • 02. High humidity and heavy rainfall that keep slabs damp and encourage mildew and algae.
  • 03. Salt air near the coast, which speeds up surface deterioration on unprotected concrete.
  • 04. Pool chemicals — chlorinated and salt-water pools splash onto the deck every day of swim season.
  • 05. Soil movement, which leads to cracking at control joints and along the pool coping.

Plain gray concrete isn’t built to handle all of that on its own. A resurfacing system chosen for Gulf Coast conditions protects the slab and keeps the deck safe and comfortable through a long pool season.

spray knockdown texture commercial pool deck

Signs Your Pool Deck Needs Resurfacing

You don’t have to wait for a deck to fail before resurfacing it. Common signs it’s time:
  • The deck is too hot to walk on barefoot in summer
  • Areas near the pool are slick when wet, or the original texture has worn smooth
  • Hairline cracks, map cracking, or failing expansion joints
  • Spalling, pitting, or flaking where the top layer of concrete is breaking down
  • Old paint or a previous coating that is peeling or faded
  • Rust, mildew, or chemical stains that won’t pressure-wash out
  • A deck that looks dated next to a new pool finish, patio, or outdoor kitchen
For a closer look at each warning sign, read our guide to the signs your pool deck needs resurfacing.

Resurfacing or Replacement: Which Does Your Pool Deck Need?

Most pool decks we evaluate are good candidates for resurfacing. Replacement is only necessary when the slab itself has failed.

Deck Condition Resurfacing Replacement
Surface wear, fading, or stains Ideal candidate Not necessary
Hairline and minor cracks Repaired during surface prep Not necessary
Hot or slippery surface Corrected with a textured, cooler finish Not necessary
Spalling or flaking top layer Usually repairable with an overlay Only if deterioration is deep
Significant settling, heaving, or uneven slabs Evaluated on site Often required
Wide structural cracks or crumbling concrete Not recommended Required
Water draining toward the house or pool Evaluated on site May be required

Because resurfacing keeps the existing slab, it avoids demolition, hauling, forming, and re-pouring — which usually means less mess, a shorter project, and a lower total cost. At every estimate, we check the slab for movement and structural cracking and tell you plainly which route makes sense. For a cost-side view, see concrete repair vs. resurfacing costs in Louisiana.

Pool Deck Coating Systems We Install

As the only authorized Sundek installer in Louisiana, South Mississippi, and South Alabama, Concrete Coatings Inc. installs Sundek's full line of pool deck systems, engineered for wet, sun-exposed outdoor concrete.

Classic Texture

Our most requested pool deck system. Classic Texture is a decorative overlay with a hand-troweled texture that’s slip-resistant underfoot and available in a wide range of colors and patterns. Because it rebuilds the wearing surface, it’s the go-to choice for decks with visible wear or anyone who wants a complete makeover.

SunSplash

SunSplash is a spray-applied acrylic texture that delivers a cooler, slip-resistant finish with a clean, uniform look. It’s a strong fit for structurally sound decks that need a new surface and better comfort.

SunCoat

SunCoat is a water-based, UV-stable acrylic coating that resists fading. We use it to refresh the color of existing textured decks and as a protective topcoat that extends the life of a resurfaced deck.

Spray Deck

Spray Deck is a durable knockdown texture coating for pool decks and light commercial surfaces, with a comfortable, slip-resistant finish.

Mastic

Mastic is a flexible joint sealant used to repair cracks and expansion joints before any coating goes down, so normal slab movement doesn’t telegraph through the new surface.

System Type Best For Finish
Classic Texture Decorative overlay Worn decks, full makeovers, maximum design flexibility Hand-troweled texture, patterns, wide color range
SunSplash Spray-applied acrylic texture Sound decks that need a cooler, safer surface Uniform spray texture
SunCoat Water-based acrylic coating Color refresh and protective topcoat on textured decks UV-stable solid color
Spray Deck Knockdown texture coating Pool decks and light commercial areas Knockdown texture
Mastic Flexible joint sealant Crack and joint repair before coating Blends into the finished surface

Not sure which system fits your deck? We’ll recommend one during your on-site estimate. You can also compare two of our most popular finishes in Classic Texture vs. SunSplash, or see every Sundek system on our coating systems page.

How Resurfacing Compares to Other Pool Deck Options

Homeowners researching pool deck resurfacing usually weigh it against a few alternatives. Here’s how they generally compare:

Option Demolition Comfort & Safety Considerations
Sundek resurfacing system None — bonds to existing slab Textured, slip-resistant, cooler than bare concrete Wide design range; periodic recoat keeps it looking new
Pavers or natural stone Often required, or raises deck height Varies by material Joints can settle, shift, and grow weeds
Tile Often required Can be slick when wet; some tile runs hot Grout upkeep; cracked tiles need replacing
DIY paint or deck stain None Little heat relief; often slick when wet Short service life outdoors; prone to peeling
Full tear-out and re-pour Full demolition Bare concrete runs hot Most disruptive and most expensive route

For most Gulf Coast pools with a sound slab, a professionally installed Sundek system offers the best balance of safety, comfort, appearance, and value. Learn more about how textured surfaces keep outdoor areas cooler and safer.

residential-pool-deck-concrete-pool-deck-sundek

Our Pool Deck Resurfacing Process

  1. On-site evaluation and estimate. We inspect and measure the deck, check cracks, joints, and drainage, and walk you through colors and textures. You receive a written estimate before any work begins.
  2. Surface preparation. The deck is pressure-cleaned and mechanically prepared, and failing paint or coatings are removed so the new system bonds to sound concrete.
  3. Crack and joint repair. Cracks are repaired and expansion joints are sealed with Mastic so normal slab movement doesn’t crack the new finish.
  4. System application. Our crew applies the base and texture coats of the system you selected — Classic Texture, SunSplash, or Spray Deck — with borders or patterns laid out in advance.
  5. Color and topcoat. SunCoat or a protective topcoat locks in color and protects against UV, moisture, and pool chemicals.
  6. Final walkthrough. We walk the finished deck with you, explain when furniture and foot traffic can return, and review care and warranty coverage.
Project length depends on the size of your deck, how much crack and joint repair it needs, and the system you choose. Your written estimate includes a project schedule, and we'll tell you exactly when foot traffic and furniture can return. Weather matters on the Gulf Coast, so we schedule each stage around rain to make sure every layer cures properly.

How Much Does Pool Deck Resurfacing Cost?

What affects the price:

  • 01. Square footage of the deck and coping areas
  • 02. Condition of the existing concrete and how much crack repair is needed
  • 03. The system selected — a Classic Texture overlay versus a spray-applied texture or recoat
  • 04. Design details such as borders, patterns, and multiple colors
  • 05. Removal of old paint or failed coatings
  • 06. Site access for equipment and materials

Price should never be the only deciding factor. When you compare bids, ask each contractor what surface preparation, crack and joint repair, and protective topcoat are included — a low bid that skips prep or relies on a thin paint-on product can fail within a single Gulf Coast summer. For more on what drives the price, see our pool deck resurfacing cost guide.

sundek classic texture pool deck

Design Options for Your Resurfaced Pool Deck

Resurfacing is also the moment to rethink the look of your outdoor space. Sundek systems come in a broad palette of colors and textures, with decorative patterns and custom borders available, so your deck can complement your home, pool finish, and landscaping. Lighter colors also help keep the surface cooler in direct sun. Browse finished pool decks in our project gallery.

Caring for a Resurfaced Pool Deck

  • 01. Rinse the deck regularly and pressure-wash on a low setting as needed to remove dirt, pollen, and mildew.
  • 02. Clear away rust sources such as metal furniture feet and planters.
  • 03. Rinse pool chemical spills promptly.
  • 04. Refresh color and protection with a periodic SunCoat recoat — we’ll recommend a schedule based on sun exposure and use.
  • 05. With proper care, Sundek reports its pool deck coatings last 10 to 15 years, depending on use.
commercial pool deck

Commercial Pool Deck Resurfacing

Hotels, resorts, apartment and condominium communities, HOAs, country clubs, and fitness centers all ask more of a pool deck: heavier foot traffic, more liability exposure, and higher expectations for appearance. Concrete Coatings Inc. resurfaces commercial pool decks throughout Louisiana, South Mississippi, and South Alabama with slip-resistant, comfortable surfaces and a finish that reflects well on the property.

We plan around your operating schedule, and our commercial projects are fully insured through LWCC and Foster & Crum. Learn more about our commercial resurfacing work, multi-family concrete coatings, and services for property managers.

For the pool deck contractor information, a business visibility audit is one related option. Ad Ad options Learn more

Why Gulf Coast Property Owners Choose Concrete Coatings Inc.

  • 01. The only authorized Sundek installer in Louisiana, South Mississippi, and South Alabama.
  • 02. 37 years in business — locally owned and operated, headquartered in Hammond with locations in Lafayette and South Alabama.
  • 03. Warranty coverage: 2 years on residential projects, 1 year on commercial projects.
  • 04. Fully insured through LWCC and Foster & Crum.
  • 05. Dedicated residential and commercial teams.
  • 06. Comparing contractors? Here's how to choose a pool deck coating contractor in Louisiana.

Pool Deck Resurfacing Across Louisiana, Mississippi & Alabama

We resurface pool decks from the Texas line to the Florida line. Find your local page: New Orleans, Metairie & Kenner, Slidell & the Northshore, Baton Rouge, Lafayette & Acadiana, Mississippi Gulf Coast, South Alabama — Mobile and Baldwin County

Frequently Asked Questions

Pool deck resurfacing is the process of repairing and preparing an existing concrete pool deck, then bonding a new textured coating system over it. It restores appearance, adds slip resistance, and makes the deck cooler underfoot without demolishing the slab. Concrete Coatings Inc. resurfaces pool decks with Sundek systems as the only authorized Sundek installer in Louisiana, South Mississippi, and South Alabama.

The cost of pool deck resurfacing depends on the deck’s square footage, the condition of the concrete, how much crack and joint repair is needed, the system selected, and design details such as borders and patterns. Because every deck is different, the most accurate price comes from an on-site evaluation. Concrete Coatings Inc. provides free written estimates across Louisiana, South Mississippi, and South Alabama.

Sundek reports its pool deck coatings last 10 to 15 years, depending on use. Regular cleaning and a periodic SunCoat recoat help a resurfaced deck hold its color and protection. Concrete Coatings Inc. backs its work with a 2-year residential warranty and a 1-year commercial warranty.

Will resurfacing make my pool deck cooler and less slippery?

Is it better to resurface or replace a pool deck?

If the concrete slab is structurally sound, resurfacing is usually the better choice: it avoids demolition, costs less, and finishes faster than a full replacement. Replacement is only necessary when the slab has major structural cracks, severe settling, or drainage problems that resurfacing can’t correct.

request pricing

Get a Free Pool Deck Resurfacing Estimate

Ready for a pool deck that’s cooler, safer, and built for the Gulf Coast? Work with the only authorized Sundek installer in Louisiana, South Mississippi, and South Alabama. Call (985) 542-2757 or request your free estimate and we’ll schedule an on-site evaluation. You're using the free version of ChatGPT. Upgrade for advanced models, better memory, and higher-quality image creation. Try Plus free
request estimate